0.6 m aluminum parabolic antenna with dual linear polarization and two SMA female connectors.
GLWB600
Global RF Tech
| Quantity: | |
|---|---|
| PDF Export | |
The GLWB600 is a 0.6 m parabolic antenna covering 12–18 GHz. It has dual linear polarization and two SMA female connectors. The specified gain is at least 35 dBi, with VSWR no greater than 2.0 and isolation of at least 20 dB. These values describe this antenna and should be considered together with its two-connector arrangement when reviewing the RF interface.
The antenna is made from aluminum. Its source table lists a dimension of 600 mm and a beamwidth of 1.8–3.0 degrees. The source side-view and rear-view drawings are retained in the downloadable company datasheet so that the mechanical arrangement can be reviewed as well as the electrical table. The source minor-level entry is reproduced with its original label and limit; no environmental rating or installation accessory is inferred from the drawing.
| Electrical: Frequency range | 12–18 GHz |
| Electrical: Gain | ≥35 dBi |
| Electrical: Polarization | Dual linear |
| Electrical: VSWR | ≤2.0 |
| Electrical: Isolation | ≥20 dB |
| Electrical: Beamwidth | 1.8–3.0° |
| Electrical: Minor level (source label) | ≤−18 dB |
| Mechanical: Connectors | 2 × SMA female |
| Mechanical: Dimension (source table) | 600 mm |
| Mechanical: Material | Aluminum |
External GPS Antenna 
Ceramic antenna 
Internal GPS Antenna 
Surveying Antenna 
Magnet Antenna 
Patch Antenna 
Rubber Antenna 
Screw Antenna 
Spring Antenna 
Other Indoor Coverage Antenna&outdoor Wlan Antenna 
2.4G Antenna 
5.8G Antenna 
Outdoor Yagi TV Antenna 
Ceiling mount antenna 
Wall mount panel antenna 
Fiberglass Antenna 
Panel Antenna 
Parabolic Antenna 
Yagi Antenna 
