50 Ω semi-flexible coaxial cable with a silver-plated copper inner conductor, solid PTFE insulation and an FEP jacket.
GL67008650FEP
Global RF Tech
| Quantity: | |
|---|---|
| PDF Export | |
The GL67008650FEP is a 670-086/50 semi-flexible RF coaxial cable with a silver-plated copper inner conductor, solid extruded PTFE insulation and an FEP jacket. The outer conductor is tinned-soaked copper wire braid. Its characteristic impedance is 50 ±2 Ω, and the overall jacket diameter is 2.65 ±0.10 mm. These construction details distinguish the cable from other similarly sized coaxial products.
Cable selection can use the supplied attenuation and mean-power table rather than a single loss figure. The table covers 800–20000 MHz, with attenuation stated at 20°C and sea level and mean power rated at 40°C ambient. Separate VSWR limits are provided for five frequency ranges. The source also gives a 6 mm minimum bend radius, a 20 mm repeated-bend radius for 40 cycles, and distinct installation, storage and operating temperature limits. The company datasheet preserves these conditions alongside the electrical values.
| Construction: Inner conductor | Silver-plated copper wire; Ø0.52 ±0.02 mm |
| Construction: Insulation | Solid extruded PTFE; Ø1.63 ±0.03 mm |
| Construction: Insulation concentricity | ≥90% |
| Construction: Outer conductor | Tinned-soaked copper wire braid; Ø2.15 ±0.10 mm |
| Construction: Jacket | FEP; Ø2.65 ±0.10 mm |
| Construction: Average jacket thickness | 0.25 mm |
| Electrical: Rated voltage | 1000 V DC |
| Electrical: Inner conductor DC resistance | ≤90 Ω/km at 20°C |
| Electrical: Outer conductor DC resistance | ≤40 Ω/km at 20°C |
| Electrical: Inductance | 0.23 μH/m |
| Electrical: Capacitance | 95 ±2 pF/m at 1 kHz |
| Electrical: Insulation resistivity (source units) | ≥1000 MΩ/km at 20°C |
| Electrical: Dielectric strength | 3000 V DC, 1 minute |
| Electrical: Characteristic impedance | 50 ±2 Ω |
| Electrical: Shielding effectiveness | ≥100 dB at 10–6000 MHz |
| Electrical: PIM | ≤−120 dBm at 910 / 1800 / 2100 / 2600 MHz |
| Electrical: Velocity | 70.8% ±0.2% |
| Electrical: Phase difference | 1440° ±4° (ΔL = 425 ±0.1 mm at 2 GHz) |
| Electrical: Delay | 4.7 ns/m |
| Electrical: Cut-off frequency | 61 GHz |
| Attenuation / Mean Power: 800 MHz | Typ. 0.61 dB/m; max. 0.701 dB/m; 135 W |
| Attenuation / Mean Power: 1000 MHz | Typ. 0.68 dB/m; max. 0.782 dB/m; 121 W |
| Attenuation / Mean Power: 1800 MHz | Typ. 0.92 dB/m; max. 1.058 dB/m; 90 W |
| Attenuation / Mean Power: 2000 MHz | Typ. 0.96 dB/m; max. 1.104 dB/m; 85 W |
| Attenuation / Mean Power: 2600 MHz | Typ. 1.10 dB/m; max. 1.265 dB/m; 75 W |
| Attenuation / Mean Power: 3800 MHz | Typ. 1.41 dB/m; max. 1.625 dB/m; 62 W |
| Attenuation / Mean Power: 6000 MHz | Typ. 1.85 dB/m; max. 2.127 dB/m; 49 W |
| Attenuation / Mean Power: 10000 MHz | Typ. 2.38 dB/m; max. 2.737 dB/m; 38 W |
| Attenuation / Mean Power: 15000 MHz | Typ. 3.04 dB/m; max. 3.496 dB/m; 31 W |
| Attenuation / Mean Power: 18000 MHz | Typ. 3.39 dB/m; max. 3.898 dB/m; 28 W |
| Attenuation / Mean Power: 20000 MHz | Typ. 3.61 dB/m; max. 4.15 dB/m; 27 W |
| VSWR: 5–3000 MHz | ≤1.10 |
| VSWR: 3000–6000 MHz | ≤1.2 |
| VSWR: 6000–12000 MHz | ≤1.3 |
| VSWR: 12000–18000 MHz | ≤1.35 |
| VSWR: 18000–20000 MHz | ≤1.4 |
| Mechanical / Environment: Minimum bend radius | 6 mm |
| Mechanical / Environment: Repeated bend radius | 20 mm, 40 cycles |
| Mechanical / Environment: Flame retardant (source requirement) | IEC60332-3-24 VW-1 (insulating & sheath) |
| Mechanical / Environment: Installation temperature | −20 to +60°C |
| Mechanical / Environment: Storage temperature | −0 to +40°C |
| Mechanical / Environment: Operating temperature | −65 to +200°C |
| Mechanical / Environment: Storage humidity | 0–80% RH |
| Mechanical / Environment: Application | Indoor/outdoor; inside base-station antennas |
| Mechanical / Environment: Restricted substances (source statement) | 2011/65/EU & 2015/863 compliant; REACH compliant |
| Mechanical / Environment: Packing | Plastic spool + carton; about 500 m/spool |
| Mechanical / Environment: Reference standards | IEC 61196-8; YD/T 2651-2013 |
| Mechanical / Environment: Jacket color options | Black RAL9005; light blue RAL5012; blue RAL5015; white RAL9001; red RAL3027 |
Specification notes: Attenuation: 20°C at sea level. Mean power rating: 40°C ambient. Requirements and compliance statements are reproduced from the source specification, not independent certifications.
External GPS Antenna 
Ceramic antenna 
Internal GPS Antenna 
Surveying Antenna 
Magnet Antenna 
Patch Antenna 
Rubber Antenna 
Screw Antenna 
Spring Antenna 
Other Indoor Coverage Antenna&outdoor Wlan Antenna 
2.4G Antenna 
5.8G Antenna 
Outdoor Yagi TV Antenna 
Ceiling mount antenna 
Wall mount panel antenna 
Fiberglass Antenna 
Panel Antenna 
Parabolic Antenna 
Yagi Antenna 
