N female High gain 4G Dual-Pol Panel Antenna GL1727D-15

Differences between similar products

Product introduction

1.Wideband Dual-Polarization Performance – Supports both 1710–2200MHz and 2200–2700MHz bands with >45° polarization isolation, enabling superior MIMO and diversity reception for stable 4G/LTE connections.

2.High Gain & Directional Coverage – Provides 14.5dBi (low band) and 15.0dBi (high band) gain with narrow horizontal (33°/30°) and vertical (30°/28°) beamwidths, delivering long-range, focused signal in targeted areas.

3.Excellent Interference Suppression – Features >25dB front-to-back ratio and >28dB isolation between ports, effectively reducing co-channel interference and ensuring clean signal quality even in dense urban environments.

4.Robust & Weather-Resistant Build – Encased in an ABS radome, operating from -40°C to +65°C, with DC-ground lightning protection. Its compact 325×325×65mm size and lightweight 2.0kg design simplifies mounting on poles or walls.

5.Low VSWR & High Power Handling – VSWR <1.8 ensures minimal return loss, while 50W maximum power input supports standard base station and repeater outputs, ensuring efficient RF transmission.

Application Scenarios

●Outdoor 4G/LTE base station sector coverage (urban and suburban)

●Indoor distributed antenna systems (DAS) for shopping malls, stadiums, and convention centers

●Rural broadband and remote area signal extension

●Tunnel and underground parking lot coverage (with proper mounting)

●Temporary event coverage (e.g., festivals, emergency response) using portable masts

FAQ

Q: What frequency range does this antenna support?
A: It operates in two bands: 1710–2200 MHz and 2200–2700 MHz.

Q: What is the antenna’s gain?
A: The gain is 14.5 dBi (1710–2200 MHz) and 15.0 dBi (2200–2700 MHz).

Q: What is the horizontal beamwidth?
A: 33° (1710–2200 MHz) and 30° (2200–2700 MHz).

Q: What polarization does it use?
A: Dual-slant (±45°) polarization.

Q: What is the maximum power handling?
A: It supports up to 50W maximum input power.

Q: What connectors are used?
A: 2x N-type female (N-F) connectors.

Q: What are the dimensions and weight?
A: 325x325x65 mm, weighing 2.0 kg with an ABS radome.