English
GL-DY601-1
Asialeren
8517710000
100pc
accepted
10000PC/days
| Quantity: | |
|---|---|
| PDF Export | |
Item | Specifications | ||
GPS Antenna | Dielectric Antenna | Center Frequency | 1575.42±3MHz |
Band Width | CF±5MHz | ||
Polarization | RHCP | ||
Gain | 2dBic（Zenith） | ||
V.S.W.R | ＜1.5 | ||
Impendance | 50Ω | ||
Axial Ratio | 3dB（max） | ||
LNA | Gain | 28±2dB | |
Noise Figure | ＜2dB | ||
V.S.W.R | ＜2.0 | ||
Supply Voltage | 2.2~5V DC | ||
Current Consumption | ＜20mA | ||
GSM Antenna | Frequency Range | 824~960MHz/1710~2170MHz | |
V.S.W.R | ＜2.0 | ||
Polarization | Linear | ||
Gain | 2.0dBi | ||
Impedance | 50Ω | ||
Mechanical | Cable | RG174 | |
Connector | SMA/MCX/FAKRA or others | ||
Material | Radome:ABS/Base:Cast Aluminum | ||
Mounting Method | Screw | ||
Environmental | Operating Temperature | -40℃~+85℃ | |
Relative Humidity | Up to 95% | ||
Ingress Protection | IP67 (exclude cable outlet) | ||
Vibration | 10 to 55Hz with 1.5mm amplitude 2hours | ||
Environmentally Friendly | ROHS Compliant | ||
Product Introduction
① Dual-system integration, one-stop communication and positioning.
Built-in GPS antenna and GSM dual-band antenna (824-960MHz/1710-2170MHz) perfectly support positioning and remote communication, suitable for complex scenarios such as in-vehicle and IoT applications.
② High-sensitivity GPS reception, accurate and fast positioning.
GPS center frequency 1575.42MHz, bandwidth ±5MHz, RHCP circular polarization design, combined with a built-in LNA (gain 28±2dB, noise figure <2dB), significantly improve signal reception quality.
③ Rugged construction, industrial-grade protection.
The housing is constructed of ABS with an aluminum alloy base, with an IP67 rating (excluding the cable outlet), dustproof and waterproof, suitable for extreme environments from -40°C to +85°C, and vibration tested.
④ Low-power, wide-voltage LNA module.
The LNA operates from 2.2V DC to 5V DC, drawing less than 20mA of current. Its low power consumption and strong compatibility make it suitable for long-term operation in vehicles and battery-powered mobile devices.
⑤ Standardized Interfaces, Flexible Installation
The cable uses RG174 with optional SMA, MCX, and FAKRA connectors. It features screw mounting and is compatible with most in-vehicle and industrial equipment, facilitating integration and replacement.
Application Scenarios
●In-Vehicle Navigation and Remote Monitoring Systems: Simultaneously achieves vehicle positioning and data communication, suitable for logistics fleets, taxi management, and other applications.
●IoT Collection Terminals: Used for remote data collection (such as weather stations and water and electricity meters), transmitting location and status information via GSM.
●Outdoor Emergency Communication Devices: Provides stable GPS positioning and GSM communication capabilities for emergency rescue and field operations.
●Industrial Automation and Agricultural Machinery Monitoring: Installed on agricultural and construction machinery, it enables precise positioning and remote control.
●Intelligent Transportation and Public Security: Supports intersection monitoring, electronic police systems, and other systems, achieving integrated positioning and data transmission.
FAQ
Q: Does this antenna support both GPS and GSM? A: Yes, it's a GPS + GSM two-in-one antenna. The GPS frequency is 1575.42MHz, and the GSM frequency bands are 824-960MHz and 1710-2170MHz.
Q: What is an LNA? What does it do?
A: An LNA is a low-noise amplifier that amplifies GPS signals without introducing excessive noise, improving receiver sensitivity and enabling faster and more accurate positioning.
Q: What is the antenna's protection rating?
A: It meets IP67 protection (except for the cable outlet), making it dustproof and resistant to temporary immersion, suitable for outdoor and harsh industrial environments.
Q: What is the GSM antenna gain? What is the signal coverage?
A: The GSM antenna has a gain of 2.0dBi and is linearly polarized. It is suitable for medium- and short-range communications and covers common mobile network frequency bands.
Q: Does it support 5G or 4G LTE?
A: The GSM frequency band covers 1710-2170MHz, including most 4G LTE bands. Specific compatibility needs to be confirmed with local carrier frequencies.
Q: What are the interface and cable options?
A: RG174 cables are standard, and interfaces such as SMA, MCX, and FAKRA are available to meet the interface requirements of different devices.
Item | Specifications | ||
GPS Antenna | Dielectric Antenna | Center Frequency | 1575.42±3MHz |
Band Width | CF±5MHz | ||
Polarization | RHCP | ||
Gain | 2dBic（Zenith） | ||
V.S.W.R | ＜1.5 | ||
Impendance | 50Ω | ||
Axial Ratio | 3dB（max） | ||
LNA | Gain | 28±2dB | |
Noise Figure | ＜2dB | ||
V.S.W.R | ＜2.0 | ||
Supply Voltage | 2.2~5V DC | ||
Current Consumption | ＜20mA | ||
GSM Antenna | Frequency Range | 824~960MHz/1710~2170MHz | |
V.S.W.R | ＜2.0 | ||
Polarization | Linear | ||
Gain | 2.0dBi | ||
Impedance | 50Ω | ||
Mechanical | Cable | RG174 | |
Connector | SMA/MCX/FAKRA or others | ||
Material | Radome:ABS/Base:Cast Aluminum | ||
Mounting Method | Screw | ||
Environmental | Operating Temperature | -40℃~+85℃ | |
Relative Humidity | Up to 95% | ||
Ingress Protection | IP67 (exclude cable outlet) | ||
Vibration | 10 to 55Hz with 1.5mm amplitude 2hours | ||
Environmentally Friendly | ROHS Compliant | ||
Product Introduction
① Dual-system integration, one-stop communication and positioning.
Built-in GPS antenna and GSM dual-band antenna (824-960MHz/1710-2170MHz) perfectly support positioning and remote communication, suitable for complex scenarios such as in-vehicle and IoT applications.
② High-sensitivity GPS reception, accurate and fast positioning.
GPS center frequency 1575.42MHz, bandwidth ±5MHz, RHCP circular polarization design, combined with a built-in LNA (gain 28±2dB, noise figure <2dB), significantly improve signal reception quality.
③ Rugged construction, industrial-grade protection.
The housing is constructed of ABS with an aluminum alloy base, with an IP67 rating (excluding the cable outlet), dustproof and waterproof, suitable for extreme environments from -40°C to +85°C, and vibration tested.
④ Low-power, wide-voltage LNA module.
The LNA operates from 2.2V DC to 5V DC, drawing less than 20mA of current. Its low power consumption and strong compatibility make it suitable for long-term operation in vehicles and battery-powered mobile devices.
⑤ Standardized Interfaces, Flexible Installation
The cable uses RG174 with optional SMA, MCX, and FAKRA connectors. It features screw mounting and is compatible with most in-vehicle and industrial equipment, facilitating integration and replacement.
Application Scenarios
●In-Vehicle Navigation and Remote Monitoring Systems: Simultaneously achieves vehicle positioning and data communication, suitable for logistics fleets, taxi management, and other applications.
●IoT Collection Terminals: Used for remote data collection (such as weather stations and water and electricity meters), transmitting location and status information via GSM.
●Outdoor Emergency Communication Devices: Provides stable GPS positioning and GSM communication capabilities for emergency rescue and field operations.
●Industrial Automation and Agricultural Machinery Monitoring: Installed on agricultural and construction machinery, it enables precise positioning and remote control.
●Intelligent Transportation and Public Security: Supports intersection monitoring, electronic police systems, and other systems, achieving integrated positioning and data transmission.
FAQ
Q: Does this antenna support both GPS and GSM? A: Yes, it's a GPS + GSM two-in-one antenna. The GPS frequency is 1575.42MHz, and the GSM frequency bands are 824-960MHz and 1710-2170MHz.
Q: What is an LNA? What does it do?
A: An LNA is a low-noise amplifier that amplifies GPS signals without introducing excessive noise, improving receiver sensitivity and enabling faster and more accurate positioning.
Q: What is the antenna's protection rating?
A: It meets IP67 protection (except for the cable outlet), making it dustproof and resistant to temporary immersion, suitable for outdoor and harsh industrial environments.
Q: What is the GSM antenna gain? What is the signal coverage?
A: The GSM antenna has a gain of 2.0dBi and is linearly polarized. It is suitable for medium- and short-range communications and covers common mobile network frequency bands.
Q: Does it support 5G or 4G LTE?
A: The GSM frequency band covers 1710-2170MHz, including most 4G LTE bands. Specific compatibility needs to be confirmed with local carrier frequencies.
Q: What are the interface and cable options?
A: RG174 cables are standard, and interfaces such as SMA, MCX, and FAKRA are available to meet the interface requirements of different devices.
