English
GL-DYLP12
Asialeren
8517710000
50pc
accepted
10000pc/day
| Quantity: | |
|---|---|
| PDF Export | |
Electrical Index | |
Product Name | Small 4G LPDA Antenna |
Product Number | GL-DYLP12 |
Frequency range（MHz） | 1710～2700 |
Gain（dBi） | 12 |
Half-power beam width（°） | H：65/50°；V：55/40° |
VSWR | ≤1.8 |
Input Impedance（Ω） | 50 |
Polarization | Vertical |
Maximum input power（W） | 50 |
Lightning protection | DC Ground |
Mechanical Index | |
Dimensions（mm） | 143*113*40 |
Connector | SMA |
Cable-mm | RG58,30 |
Antenna weight（kg） | 0.24(including mounting kits and the box) |
Operating temperature（°c） | -40～60 |
Radome material | ABS |
Radome color | white |
Application: GSM/CDMA/PCS/3G/WLAN/4G/LTE system | |
Product Introduction
1. Palm-Sized, High-Gain: Measuring 143×113×40mm (smaller than an adult's palm), it achieves 12dBi high gain, pushing the performance limits of small antennas.
2. Precise and Directional Coverage: Dual-level beamwidths of 65°/50° horizontally and 55°/40° vertically focus the signal to a range of 3km, improving wall penetration by 35%.
3. Full 4G Band Compatibility: Covering 1710-2700MHz (Bands 1/3/7/8/20/28), it supports global 4G/LTE networks and 3G/WCDMA.
4. Industrial-Grade Protective Design: The white ABS protective cover is UV-resistant, operates in a wide temperature range of -40°C to 60°C, and comes standard with lightning protection and DC grounding.
5. Ready-to-use Configuration: Pre-installed with a 30cm RG58 cable and SMA connector, weighs 0.24kg and includes a mounting kit. The bracket adapts to walls or poles for quick deployment.
Application Scenarios
Mobile Emergency Communications: Quickly Set Up a Backpack-Sized Portable Base Station
Drone Image Transmission Enhancement: Increases the Control Range of FPV Drones
Home Signal Deadspot Elimination: Enhances Indoor Coverage with Directional Balcony
In-Vehicle Mobile Hotspot: Attaches to Car Roofs to Extend CPE Signal Range
Temporary Surveillance Backhaul: Transmits Data from Security Cameras at Construction Sites/Events
FAQ
Q: Does the SMA Connector Support 5G Devices?
A: Compatible with the sub-6GHz frequency band, but requires a female SMA connector on the device (commonly found on CPE/industrial routers).
Q: Can the Cable Length Be Customized?
A: 30cm is standard, with 1m/3m (up to 5m) custom lengths available for a fee. Longer cables require a low-loss LMR-200 cable.
Q: Are Special Tools Required for Installation?
A: Includes a U-shaped bracket and stainless steel cable ties. Wall/pole mounting (Ø30-50mm) can be secured manually in 3 minutes.
Q: What is the Waterproof Rating?
A: The ABS protective cover is IP54 splashproof (not immersion-resistant). For heavy rain, waterproof tape is recommended around the connectors.
Q: Why is the beam narrower in the high-frequency band?
A: At 2700MHz, the beam narrows to 40° (vertical), enhancing high-frequency directionality and making it more suitable for long-distance point-to-point transmission.
Q: Can it be used for WiFi enhancement?
A: It is compatible with the 2400-2500MHz WiFi band, but the gain is lower than that of a dedicated dual-band antenna. It is recommended only as a temporary replacement.
Q: Wind load resistance?
A: It is safe up to 60km/h wind speed (equivalent to force 7 wind). In strong wind areas, it is recommended to add auxiliary fixing straps.
Electrical Index | |
Product Name | Small 4G LPDA Antenna |
Product Number | GL-DYLP12 |
Frequency range（MHz） | 1710～2700 |
Gain（dBi） | 12 |
Half-power beam width（°） | H：65/50°；V：55/40° |
VSWR | ≤1.8 |
Input Impedance（Ω） | 50 |
Polarization | Vertical |
Maximum input power（W） | 50 |
Lightning protection | DC Ground |
Mechanical Index | |
Dimensions（mm） | 143*113*40 |
Connector | SMA |
Cable-mm | RG58,30 |
Antenna weight（kg） | 0.24(including mounting kits and the box) |
Operating temperature（°c） | -40～60 |
Radome material | ABS |
Radome color | white |
Application: GSM/CDMA/PCS/3G/WLAN/4G/LTE system | |
Product Introduction
1. Palm-Sized, High-Gain: Measuring 143×113×40mm (smaller than an adult's palm), it achieves 12dBi high gain, pushing the performance limits of small antennas.
2. Precise and Directional Coverage: Dual-level beamwidths of 65°/50° horizontally and 55°/40° vertically focus the signal to a range of 3km, improving wall penetration by 35%.
3. Full 4G Band Compatibility: Covering 1710-2700MHz (Bands 1/3/7/8/20/28), it supports global 4G/LTE networks and 3G/WCDMA.
4. Industrial-Grade Protective Design: The white ABS protective cover is UV-resistant, operates in a wide temperature range of -40°C to 60°C, and comes standard with lightning protection and DC grounding.
5. Ready-to-use Configuration: Pre-installed with a 30cm RG58 cable and SMA connector, weighs 0.24kg and includes a mounting kit. The bracket adapts to walls or poles for quick deployment.
Application Scenarios
Mobile Emergency Communications: Quickly Set Up a Backpack-Sized Portable Base Station
Drone Image Transmission Enhancement: Increases the Control Range of FPV Drones
Home Signal Deadspot Elimination: Enhances Indoor Coverage with Directional Balcony
In-Vehicle Mobile Hotspot: Attaches to Car Roofs to Extend CPE Signal Range
Temporary Surveillance Backhaul: Transmits Data from Security Cameras at Construction Sites/Events
FAQ
Q: Does the SMA Connector Support 5G Devices?
A: Compatible with the sub-6GHz frequency band, but requires a female SMA connector on the device (commonly found on CPE/industrial routers).
Q: Can the Cable Length Be Customized?
A: 30cm is standard, with 1m/3m (up to 5m) custom lengths available for a fee. Longer cables require a low-loss LMR-200 cable.
Q: Are Special Tools Required for Installation?
A: Includes a U-shaped bracket and stainless steel cable ties. Wall/pole mounting (Ø30-50mm) can be secured manually in 3 minutes.
Q: What is the Waterproof Rating?
A: The ABS protective cover is IP54 splashproof (not immersion-resistant). For heavy rain, waterproof tape is recommended around the connectors.
Q: Why is the beam narrower in the high-frequency band?
A: At 2700MHz, the beam narrows to 40° (vertical), enhancing high-frequency directionality and making it more suitable for long-distance point-to-point transmission.
Q: Can it be used for WiFi enhancement?
A: It is compatible with the 2400-2500MHz WiFi band, but the gain is lower than that of a dedicated dual-band antenna. It is recommended only as a temporary replacement.
Q: Wind load resistance?
A: It is safe up to 60km/h wind speed (equivalent to force 7 wind). In strong wind areas, it is recommended to add auxiliary fixing straps.
