English
GL236
Asialeren
8517710000
100pc
Accepted
10000pc/day
| Quantity: | |
|---|---|
| PDF Export | |
Item | Specifications | |
Antenna(2 pins) | Frequency Range | 1561.098~ 1602MHz |
Polarization | RHCP | |
Gain | 5dBic@PCB（Zenith） | |
V.S.W.R | ＜1.5 | |
Impedance | 50 Ω | |
Dimension | 33.5*33.5*6mm | |
Axial Ratio | 3dB（max） | |
LNA | Gain | 28±2dB |
Noise Figure | ≤1.5dB | |
Supply Voltage | 3~5V DC | |
Current Consumption | ＜20mA | |
V.S.W.R | ＜2.0 | |
Mechanical | Cable | RG174 |
Connector | SMA or others | |
Radome Material | ABS | |
Mounting Method | Magnet/Adhesive | |
Environmental | Operating Temperature | -40℃~+85℃ |
Relative Humidity | Up to 95% | |
Ingress Protection | IP67 | |
Vibration | 10 to 55Hz with 1.5mm amplitude 2hours | |
Environmentally Friendly | ROHS Compliant | |
Product Introduction
Military-Grade Precision
Axial ratio ≤3dB & 5dBic gain ensure centimeter-level accuracy for RTK/SBAS applications.
Ultra-Low Noise Amplifier
28dB LNA with ≤1.5dB noise figure boosts weak satellite signals in urban canyons/mountains.
Extreme Environment Ready
Operates at -40°C to +85°C with IP67 waterproofing – ideal for drones, marine, and industrial equipment.
Compact & Versatile Mounting
33.5x33.5x6mm design with magnetic/adhesive base fits tight spaces on vehicles, robots, or IoT devices.
Global Compliance & Reliability
ROHS-certified, withstands 55Hz vibration, and supports all GNSS bands (GPS/GLONASS/Galileo).
Precision Agriculture: Guidance systems for tractors
Surveying: RTK mapping and land drones
Autonomous Vehicles: Navigation for robots/UGVs
Marine: Boat tracking and navigation
IoT Asset Tracking: Logistics containers/fleet management
Q: What GNSS systems does GL236 support?
A: All major constellations (GPS, GLONASS, Galileo, BeiDou) in 1561–1602MHz band.
Q: Is external power required?
A: Yes, 3-5V DC via coaxial cable (consumes <20mA).
Q: How to mount the antenna?
A: Use built-in magnet or 3M adhesive; tear-off tongue for easy installation.
Q: Does it work in rainy conditions?
A: Yes, IP67 rating protects against dust/water immersion (1m depth).
Q: Cable/connector options?
A: Standard RG174 cable; SMA connector (customizable).
Q: Why choose an active antenna?
A: Built-in LNA amplifies weak signals for higher accuracy vs. passive antennas.
Q: What’s the radiation pattern?
A: Omnidirectional RHCP polarization (see datasheet XY/XZ/YZ-plane charts).
Q: Compliance certifications?
A: ROHS, vibration-tested (10–55Hz), and humidity-resistant (up to 95% RH).
Item | Specifications | |
Antenna(2 pins) | Frequency Range | 1561.098~ 1602MHz |
Polarization | RHCP | |
Gain | 5dBic@PCB（Zenith） | |
V.S.W.R | ＜1.5 | |
Impedance | 50 Ω | |
Dimension | 33.5*33.5*6mm | |
Axial Ratio | 3dB（max） | |
LNA | Gain | 28±2dB |
Noise Figure | ≤1.5dB | |
Supply Voltage | 3~5V DC | |
Current Consumption | ＜20mA | |
V.S.W.R | ＜2.0 | |
Mechanical | Cable | RG174 |
Connector | SMA or others | |
Radome Material | ABS | |
Mounting Method | Magnet/Adhesive | |
Environmental | Operating Temperature | -40℃~+85℃ |
Relative Humidity | Up to 95% | |
Ingress Protection | IP67 | |
Vibration | 10 to 55Hz with 1.5mm amplitude 2hours | |
Environmentally Friendly | ROHS Compliant | |
Product Introduction
Military-Grade Precision
Axial ratio ≤3dB & 5dBic gain ensure centimeter-level accuracy for RTK/SBAS applications.
Ultra-Low Noise Amplifier
28dB LNA with ≤1.5dB noise figure boosts weak satellite signals in urban canyons/mountains.
Extreme Environment Ready
Operates at -40°C to +85°C with IP67 waterproofing – ideal for drones, marine, and industrial equipment.
Compact & Versatile Mounting
33.5x33.5x6mm design with magnetic/adhesive base fits tight spaces on vehicles, robots, or IoT devices.
Global Compliance & Reliability
ROHS-certified, withstands 55Hz vibration, and supports all GNSS bands (GPS/GLONASS/Galileo).
Precision Agriculture: Guidance systems for tractors
Surveying: RTK mapping and land drones
Autonomous Vehicles: Navigation for robots/UGVs
Marine: Boat tracking and navigation
IoT Asset Tracking: Logistics containers/fleet management
Q: What GNSS systems does GL236 support?
A: All major constellations (GPS, GLONASS, Galileo, BeiDou) in 1561–1602MHz band.
Q: Is external power required?
A: Yes, 3-5V DC via coaxial cable (consumes <20mA).
Q: How to mount the antenna?
A: Use built-in magnet or 3M adhesive; tear-off tongue for easy installation.
Q: Does it work in rainy conditions?
A: Yes, IP67 rating protects against dust/water immersion (1m depth).
Q: Cable/connector options?
A: Standard RG174 cable; SMA connector (customizable).
Q: Why choose an active antenna?
A: Built-in LNA amplifies weak signals for higher accuracy vs. passive antennas.
Q: What’s the radiation pattern?
A: Omnidirectional RHCP polarization (see datasheet XY/XZ/YZ-plane charts).
Q: Compliance certifications?
A: ROHS, vibration-tested (10–55Hz), and humidity-resistant (up to 95% RH).
