English
GL-DY011C
Asialeren
8517710000
100pc
accepted
10000PC/days
| Quantity: | |
|---|---|
| PDF Export | |
Item | Specifications | |
Antenna | Frequency Range | 824~960/1710~2170MHz |
Polarization | Linear | |
Gain | 2.0dBi（Zenith） | |
V.S.W.R（min） | ＜2.5 | |
Impedance | 50Ω | |
Mechanical | Cable | |
Connector | SMA or others | |
Radome Material | ABS | |
Mounting Method | Magnet | |
Environmental | Operating Temperature | -40℃~+85℃ |
Relative Humidity | Up to 95% | |
Vibration | 10 to 55Hz with 1.5mm amplitude 2hours | |
Environmentally Friendly | ROHS Compliant | |
A "full 4G frequency magnetic antenna" is an antenna designed to operate over the full frequency range used by 4G networks. These networks typically include bands such as 700 MHz, 800 MHz, 1800 MHz, and 2700 MHz, depending on the specific network infrastructure.
This type of antenna is often used in devices such as routers, access points, or mobile hotspots that need to connect to multiple 4G networks at the same time. The "magnet mount" part refers to the design that uses magnets to easily attach the antenna to metal surfaces, making it easy to install in a variety of environments.
This type of antenna is critical to ensuring reliable wireless communications, especially in areas where multiple operators operate on different frequency bands. They are able to switch between different frequency bands as needed, providing better coverage and connectivity, optimizing signal strength and reducing interference.
Product Introduction
The GL-DY011C is a full 4G LTE magnet-mounted antenna featuring vertical polarization and an SMA male connector. Designed for robust performance across 824-960MHz and 1710-2170MHz bands, it delivers 2.0dBi gain with an ABS radome for durability. The integrated magnet base allows quick installation on metal surfaces, while the RG174 cable ensures flexible routing. Ideal for environments requiring stable 4G connectivity, it operates in temperatures from -40°C to +85°C and complies with ROHS standards.
Application Scenarios
Mobile Command Units: Provides reliable signal for emergency response vehicles with rapid magnetic deployment.
Rural Broadband: Extends 4G coverage for fixed wireless access points mounted on grain silos or metal rooftops.
Marine Communications: Temporary installation on boat cabins or shipping containers for coastal LTE connectivity.
FAQ
Q: Can the magnet interfere with antenna performance?
A: No, the base uses rare-earth magnets positioned to minimize RF disruption.
Q: Why use ABS instead of rubber for the radome?
A: ABS offers better UV resistance for permanent outdoor exposure versus rubber.
Q: Is the cable length customizable beyond RG174?
A: Yes, but exceeding 3m may require signal amplifiers due to RG174’s high loss.
Q: Will the magnet adhere to aluminum surfaces?
A: Only if the aluminum is thick enough (>3mm) to induce sufficient magnetic attraction.
Q: Can it handle 5G NR bands with a filter?
A: No, its passive design lacks the bandwidth for 5G frequencies.
Q: Why 2.0dBi gain instead of higher?
A: Optimized for near-omnidirectional coverage critical for mobile/marine use.
The differences from other similar products
Model | Frequency Range | Gain | Connector Type | Mounting Method |
GL-DY011C | 824-960MHz / 1710-2170MHz | 2.0dBi | SMA male | Magnet |
GL046-19 | 700-960MHz / 1710-2690MHz | 2.0dBi | SMA | Magnet/Screw |
GL234C | 1559.052-1616MHz / 1205.094-1278MHz | ≥3dBi | TNC-K | Magnet/Screw |
Item | Specifications | |
Antenna | Frequency Range | 824~960/1710~2170MHz |
Polarization | Linear | |
Gain | 2.0dBi（Zenith） | |
V.S.W.R（min） | ＜2.5 | |
Impedance | 50Ω | |
Mechanical | Cable | |
Connector | SMA or others | |
Radome Material | ABS | |
Mounting Method | Magnet | |
Environmental | Operating Temperature | -40℃~+85℃ |
Relative Humidity | Up to 95% | |
Vibration | 10 to 55Hz with 1.5mm amplitude 2hours | |
Environmentally Friendly | ROHS Compliant | |
A "full 4G frequency magnetic antenna" is an antenna designed to operate over the full frequency range used by 4G networks. These networks typically include bands such as 700 MHz, 800 MHz, 1800 MHz, and 2700 MHz, depending on the specific network infrastructure.
This type of antenna is often used in devices such as routers, access points, or mobile hotspots that need to connect to multiple 4G networks at the same time. The "magnet mount" part refers to the design that uses magnets to easily attach the antenna to metal surfaces, making it easy to install in a variety of environments.
This type of antenna is critical to ensuring reliable wireless communications, especially in areas where multiple operators operate on different frequency bands. They are able to switch between different frequency bands as needed, providing better coverage and connectivity, optimizing signal strength and reducing interference.
Product Introduction
The GL-DY011C is a full 4G LTE magnet-mounted antenna featuring vertical polarization and an SMA male connector. Designed for robust performance across 824-960MHz and 1710-2170MHz bands, it delivers 2.0dBi gain with an ABS radome for durability. The integrated magnet base allows quick installation on metal surfaces, while the RG174 cable ensures flexible routing. Ideal for environments requiring stable 4G connectivity, it operates in temperatures from -40°C to +85°C and complies with ROHS standards.
Application Scenarios
Mobile Command Units: Provides reliable signal for emergency response vehicles with rapid magnetic deployment.
Rural Broadband: Extends 4G coverage for fixed wireless access points mounted on grain silos or metal rooftops.
Marine Communications: Temporary installation on boat cabins or shipping containers for coastal LTE connectivity.
FAQ
Q: Can the magnet interfere with antenna performance?
A: No, the base uses rare-earth magnets positioned to minimize RF disruption.
Q: Why use ABS instead of rubber for the radome?
A: ABS offers better UV resistance for permanent outdoor exposure versus rubber.
Q: Is the cable length customizable beyond RG174?
A: Yes, but exceeding 3m may require signal amplifiers due to RG174’s high loss.
Q: Will the magnet adhere to aluminum surfaces?
A: Only if the aluminum is thick enough (>3mm) to induce sufficient magnetic attraction.
Q: Can it handle 5G NR bands with a filter?
A: No, its passive design lacks the bandwidth for 5G frequencies.
Q: Why 2.0dBi gain instead of higher?
A: Optimized for near-omnidirectional coverage critical for mobile/marine use.
The differences from other similar products
Model | Frequency Range | Gain | Connector Type | Mounting Method |
GL-DY011C | 824-960MHz / 1710-2170MHz | 2.0dBi | SMA male | Magnet |
GL046-19 | 700-960MHz / 1710-2690MHz | 2.0dBi | SMA | Magnet/Screw |
GL234C | 1559.052-1616MHz / 1205.094-1278MHz | ≥3dBi | TNC-K | Magnet/Screw |
