English
GL-DYP0827
Asialeren
8517710000
100pc
Accepted
10000pc/day
| Quantity: | |
|---|---|
| PDF Export | |
Electrical Specifications | ||
Frequency Range | 790-960MHz | 1710-2700MHz |
VSWR | ≤1.4 | |
Gain | 7dBi | 9dBi |
Horizontal beam width | 65° | |
Vertical beam width | 55° | |
Front-to-back ratio | ≥15dB | |
Polarization | Vertical | |
Input Impedance | 50Ω | |
Maximum input power | 50W | |
Lightning protection | DC Ground | |
Mechanical Specifications | ||
Input connector type | N female | |
Installation | Mounting on the wall | |
Dimensions | 210×180×43mm | |
Antenna weight | 0.5kg | |
Radiating Element Material | AI | |
Radome material | ABS | |
Operating temperature | -40°C to +65 °C | |
Differences between similar antennas
P/N | GL-DYP0827 | GL-DYP04 | GL-DYP11 |
Gain | 7/9 | 4/7 | 11 |
V.S.W.R. | 1.4 | 1.5 | 1.8 |
Product Introduction
1. Dual-band high-performance coverage
790-960MHz (7dBi) + 1710-2700MHz (9dBi) dual-band coordination, perfect support for 2G/3G/4G/LTE and IoT bands, VSWR≤1.4 reduces 22% signal loss.
2. Intelligent beam precision transmission
65°×55° golden beam angle design, coverage area increased by 40%, ≥15dB front-end ratio effectively isolates adjacent frequency interference, ensuring signal purity in dense urban areas.
3. Industrial-grade all-weather protection
ABS anti-ultraviolet shell + aluminum alloy radiator, stable operation in extreme environments of -40℃~65℃, DC grounding lightning protection design passed IEC61000-4-5 certification.
4. Minimalist wall-mounted integration
210×180×43mm ultra-thin design (only 0.5kg), standard wall-mounted bracket, 3 minutes of rapid deployment, can be installed on walls/towers.
5. High-power long-lasting operation
50W ultra-high input power carrying capacity (average 30W for similar products), supports 7×24 hours full-load operation, without the risk of heat dissipation attenuation.
Application scenarios
1. Smart buildings: building security monitoring backhaul / smart meter concentrator
2. Industrial Internet of Things: factory equipment status monitoring / remote PLC control system
3. Rural network coverage: remote area signal relay station / agricultural sensor gateway
4. Emergency communication: temporary command center base station / disaster rescue vehicle network
5. Dedicated network: mining area communication system / port crane remote control
FAQ
Q: Can two frequency band signals be received at the same time?
A: Dual frequency bands work independently, supporting 790-960MHz and 1710-2700MHz concurrent transmission.
Q: How many years can the ABS shell be used outdoors?
A: UV protective coating, passed 3000 hours of xenon lamp aging test, life ≥ 8 years (temperature ≤ 55℃ environment).
Q: Is a ground wire required?
A: A DC ground wire (PE end) must be connected. The lightning protection effect depends on the ground resistance <4Ω.
Q: Does it support the 5G NR band?
A: It only supports some frequency bands of n3 (1800MHz). Full 5G requires the optional 3.5GHz model.
Q: Can the horizontal beam angle be adjusted?
A: It is fixed at 65° and cannot be adjusted, but the bracket supports ±15° pitch angle adjustment to cope with terrain differences.
Q: What are the equipment requirements for 50W power?
A: It needs to be equipped with a RF device with an output power of ≥30dBm.
Electrical Specifications | ||
Frequency Range | 790-960MHz | 1710-2700MHz |
VSWR | ≤1.4 | |
Gain | 7dBi | 9dBi |
Horizontal beam width | 65° | |
Vertical beam width | 55° | |
Front-to-back ratio | ≥15dB | |
Polarization | Vertical | |
Input Impedance | 50Ω | |
Maximum input power | 50W | |
Lightning protection | DC Ground | |
Mechanical Specifications | ||
Input connector type | N female | |
Installation | Mounting on the wall | |
Dimensions | 210×180×43mm | |
Antenna weight | 0.5kg | |
Radiating Element Material | AI | |
Radome material | ABS | |
Operating temperature | -40°C to +65 °C | |
Differences between similar antennas
P/N | GL-DYP0827 | GL-DYP04 | GL-DYP11 |
Gain | 7/9 | 4/7 | 11 |
V.S.W.R. | 1.4 | 1.5 | 1.8 |
Product Introduction
1. Dual-band high-performance coverage
790-960MHz (7dBi) + 1710-2700MHz (9dBi) dual-band coordination, perfect support for 2G/3G/4G/LTE and IoT bands, VSWR≤1.4 reduces 22% signal loss.
2. Intelligent beam precision transmission
65°×55° golden beam angle design, coverage area increased by 40%, ≥15dB front-end ratio effectively isolates adjacent frequency interference, ensuring signal purity in dense urban areas.
3. Industrial-grade all-weather protection
ABS anti-ultraviolet shell + aluminum alloy radiator, stable operation in extreme environments of -40℃~65℃, DC grounding lightning protection design passed IEC61000-4-5 certification.
4. Minimalist wall-mounted integration
210×180×43mm ultra-thin design (only 0.5kg), standard wall-mounted bracket, 3 minutes of rapid deployment, can be installed on walls/towers.
5. High-power long-lasting operation
50W ultra-high input power carrying capacity (average 30W for similar products), supports 7×24 hours full-load operation, without the risk of heat dissipation attenuation.
Application scenarios
1. Smart buildings: building security monitoring backhaul / smart meter concentrator
2. Industrial Internet of Things: factory equipment status monitoring / remote PLC control system
3. Rural network coverage: remote area signal relay station / agricultural sensor gateway
4. Emergency communication: temporary command center base station / disaster rescue vehicle network
5. Dedicated network: mining area communication system / port crane remote control
FAQ
Q: Can two frequency band signals be received at the same time?
A: Dual frequency bands work independently, supporting 790-960MHz and 1710-2700MHz concurrent transmission.
Q: How many years can the ABS shell be used outdoors?
A: UV protective coating, passed 3000 hours of xenon lamp aging test, life ≥ 8 years (temperature ≤ 55℃ environment).
Q: Is a ground wire required?
A: A DC ground wire (PE end) must be connected. The lightning protection effect depends on the ground resistance <4Ω.
Q: Does it support the 5G NR band?
A: It only supports some frequency bands of n3 (1800MHz). Full 5G requires the optional 3.5GHz model.
Q: Can the horizontal beam angle be adjusted?
A: It is fixed at 65° and cannot be adjusted, but the bracket supports ±15° pitch angle adjustment to cope with terrain differences.
Q: What are the equipment requirements for 50W power?
A: It needs to be equipped with a RF device with an output power of ≥30dBm.
