English
GL-DY131
Asialeren
8517710000
100pc
Accepted
10000pc/day
| Quantity: | |
|---|---|
| PDF Export | |
4G Internal Patch Antenna IPEX connector GL-DY131
Frequency range（MHz） | 698-960/1710-2690 |
Gain（dBi） | 3 |
Polarization | Vertical |
Impedance (Ω) | 50 |
Max Power (W) | 50 |
VSWR | ≤2.0 |
Connector | IPEX |
Dimensions(mm) | 35x5x0.8 |
Cable | RG1.13/RG1.37 |
Temperature (℃) | -30~60 |
Humidity (%) | 5~95 |
Product Introduction
1. 50W ultra-high power carrying capacity
The industry's top power capacity (EN 62368-1 certified), supports Cat-12 LTE transmission, and meets the continuous high-load communication needs of remote monitoring equipment.
2. Military-grade environmental tolerance
-30°C to +60°C wide temperature range + 5-95% humidity range (MIL-STD-810G Method 507.6), adaptable to extreme climates such as deserts/tropics.
3. Accurate RF performance
VSWR≤2.0 (full-band measured ≤1.8) + 50Ω precision impedance matching, base station handshake success rate increased by 35% (compared to conventional VSWR>3.0 antenna).
4.Ultra-thin embedded design
0.8mm extreme thickness (tolerance ±0.05mm) + 35×5mm miniature size, suitable for space-constrained devices.
5.Industrial-grade connection solution
IPEX MHF4 generation interface + double-shielded RG1.13/RG1.37 coaxial cable (optional), anti-electromagnetic interference capability exceeds the standard by 30%.
Application scenarios
●Remote oil and gas monitoring equipment: Maintain 50W power to transmit well site data in high temperature desert environment (60°C).
●In-vehicle emergency call system: Ensure signal strength when triggering eCall in extremely cold areas of -30°C.
●Industrial Internet of Things gateway: Embedded installation in high humidity workshop (95% RH), stable communication in metal cabinet.
●Ship monitoring terminal: Salt spray corrosion environment is protected by IP67 sealing design to protect antenna module.
●Emergency communication equipment: 3dBi gain + vertical polarization optimization, 15dBm receiving sensitivity is increased in weak signal scenarios such as mountainous areas/tunnels.
FAQ
Q: Does 50W power require heat dissipation design?
A:It is recommended to reserve ≥20×20mm grounding copper foil (4oz thickness) on the PCB, and thermal conductive silicone (thermal resistance ≤1.5℃/W) is required for continuous full power operation.
Q: IPEX interface version compatibility?
A:Using IPEX MHF4 (4th generation), compatible with 1~3 generations requires adapter (I-PEX 2192810-4 is recommended).
Q: Cable selection recommendations?
A:RG1.13 (low bending loss) is suitable for dynamic scenarios, RG1.37 (shielding effectiveness 90dB) is used in strong electromagnetic interference environments.
Q: Does it support 5G NR frequency bands?
A:Covering n71 (600MHz)/n28 (700MHz)/n41 (2500MHz), but n78 (3500MHz) requires a high-frequency model.
Q: What are the test conditions for VSWR≤2.0?
A:Based on 40×40mm FR4 ground plane (DK=4.6), measured in a microwave darkroom according to IEEE 149-2020 standard.
Q: Installation spacing requirements?
A:Distance from metal housing ≥6mm (λ/4@2.6GHz), adjacent component height ≤2mm.
Q: Batch customization options?
A:Support cable length/connector angle/frequency band fine-tuning customization, MOQ 500pcs, delivery time 15 days
4G Internal Patch Antenna IPEX connector GL-DY131
Frequency range（MHz） | 698-960/1710-2690 |
Gain（dBi） | 3 |
Polarization | Vertical |
Impedance (Ω) | 50 |
Max Power (W) | 50 |
VSWR | ≤2.0 |
Connector | IPEX |
Dimensions(mm) | 35x5x0.8 |
Cable | RG1.13/RG1.37 |
Temperature (℃) | -30~60 |
Humidity (%) | 5~95 |
Product Introduction
1. 50W ultra-high power carrying capacity
The industry's top power capacity (EN 62368-1 certified), supports Cat-12 LTE transmission, and meets the continuous high-load communication needs of remote monitoring equipment.
2. Military-grade environmental tolerance
-30°C to +60°C wide temperature range + 5-95% humidity range (MIL-STD-810G Method 507.6), adaptable to extreme climates such as deserts/tropics.
3. Accurate RF performance
VSWR≤2.0 (full-band measured ≤1.8) + 50Ω precision impedance matching, base station handshake success rate increased by 35% (compared to conventional VSWR>3.0 antenna).
4.Ultra-thin embedded design
0.8mm extreme thickness (tolerance ±0.05mm) + 35×5mm miniature size, suitable for space-constrained devices.
5.Industrial-grade connection solution
IPEX MHF4 generation interface + double-shielded RG1.13/RG1.37 coaxial cable (optional), anti-electromagnetic interference capability exceeds the standard by 30%.
Application scenarios
●Remote oil and gas monitoring equipment: Maintain 50W power to transmit well site data in high temperature desert environment (60°C).
●In-vehicle emergency call system: Ensure signal strength when triggering eCall in extremely cold areas of -30°C.
●Industrial Internet of Things gateway: Embedded installation in high humidity workshop (95% RH), stable communication in metal cabinet.
●Ship monitoring terminal: Salt spray corrosion environment is protected by IP67 sealing design to protect antenna module.
●Emergency communication equipment: 3dBi gain + vertical polarization optimization, 15dBm receiving sensitivity is increased in weak signal scenarios such as mountainous areas/tunnels.
FAQ
Q: Does 50W power require heat dissipation design?
A:It is recommended to reserve ≥20×20mm grounding copper foil (4oz thickness) on the PCB, and thermal conductive silicone (thermal resistance ≤1.5℃/W) is required for continuous full power operation.
Q: IPEX interface version compatibility?
A:Using IPEX MHF4 (4th generation), compatible with 1~3 generations requires adapter (I-PEX 2192810-4 is recommended).
Q: Cable selection recommendations?
A:RG1.13 (low bending loss) is suitable for dynamic scenarios, RG1.37 (shielding effectiveness 90dB) is used in strong electromagnetic interference environments.
Q: Does it support 5G NR frequency bands?
A:Covering n71 (600MHz)/n28 (700MHz)/n41 (2500MHz), but n78 (3500MHz) requires a high-frequency model.
Q: What are the test conditions for VSWR≤2.0?
A:Based on 40×40mm FR4 ground plane (DK=4.6), measured in a microwave darkroom according to IEEE 149-2020 standard.
Q: Installation spacing requirements?
A:Distance from metal housing ≥6mm (λ/4@2.6GHz), adjacent component height ≤2mm.
Q: Batch customization options?
A:Support cable length/connector angle/frequency band fine-tuning customization, MOQ 500pcs, delivery time 15 days
